Publications

Constructing phase diagrams of block copolymers with A- block -(B- stat -C) architecture
Weidinger, B.; von Coelln, N.; Yang, G.; Nirschl, H.; Wacker, I.; Schröder, R. R.; Tegeder, P.; Blasco, E.
2024. Polymer Chemistry, 15 (40), 4093–4100. doi:10.1039/d4py00872c

Investigating Dynamic Changes in 3D‐Printed Covalent Adaptable Polymer Networks
Jia, Y.; Spiegel, C. A.; Diehm, J.; Zimmermann, D.; Huber, B.; Mutlu, H.; Franzreb, M.; Wilhelm, M.; Théato, P.; Blasco, E.; Tsotsalas, M.
2024. Macromolecular Materials and Engineering, 309 (9), Art.-Nr.: 2300438. doi:10.1002/mame.202300438

Printing Green: Microalgae‐Based Materials for 3D Printing with Light
Vazquez-Martel, C.; Florido Martins, L.; Genthner, E.; Almeida, C.; Martel Quintana, A.; Bastmeyer, M.; Gómez Pinchetti, J. L.; Blasco, E.
2024. Advanced Materials, 36 (33), Art.-Nr.: 2402786. doi:10.1002/adma.202402786

3D Matter Made to Order
Blasco, E.; Lemmer, U.; Selhuber-Unkel, C.; Wegener, M.
2024. Advanced Functional Materials, 34 (20), Art.-Nr.: 2315919. doi:10.1002/adfm.202315919

Photochemically Activated 3D Printing Inks: Current Status, Challenges, and Opportunities
Gauci, S. C.; Vranic, A.; Blasco, E.; Bräse, S.; Wegener, M.; Barner-Kowollik, C.
2024. Advanced Materials, 36 (3), Art.-Nr.: 2306468. doi:10.1002/adma.202306468

Deconstructing 3D Structured Materials by Modern Ultramicrotomy for Multimodal Imaging and Volume Analysis across Length Scales
Wacker, I.; Curticean, R.; Ryklin, D.; Weidinger, B.; Mayer, F.; Huang, L.-Y.; Hoffmann, J.; Islam, M.; von Coelln, N.; Schmitt, T.; Huck, C.; Tegeder, P.; Feist, F.; Kammerer, J. A.; Barner-Kowollik, C.; Wegener, M.; Blasco, E.; Gengenbach, U.; Schröder, R. R.
2024. Advanced Functional Materials, 34 (20), Art.-Nr.: 2302025. doi:10.1002/adfm.202302025

3D Printing Hierarchically Nano‐Ordered Structures
Weidinger, B.; Yang, G.; von Coelln, N.; Nirschl, H.; Wacker, I.; Tegeder, P.; Schröder, R. R.; Blasco, E.
2023. Advanced Science, 10 (28), Art.-Nr.: 2302756. doi:10.1002/advs.202302756

Two Functions from a Single Photoresist: Tuning Microstructure Degradability from Light‐Stabilized Dynamic Materials
Gauci, S. C.; Ehrmann, K.; Gernhardt, M.; Tuten, B.; Blasco, E.; Frisch, H.; Jayalatharachchi, V.; Blinco, J. P.; Houck, H. A.; Barner-Kowollik, C.
2023. Advanced Materials, 35 (22), Art.-Nr. 2300151. doi:10.1002/adma.202300151

Challenges and Opportunities in 3D Laser Printing Based on (1 + 1)-Photon Absorption
Hahn, V.; Bojanowski, N. M.; Rietz, P.; Feist, F.; Kozlowska, M.; Wenzel, W.; Blasco, E.; Bräse, S.; Barner-Kowollik, C.; Wegener, M.
2023. ACS Photonics, 10 (1), 24–33. doi:10.1021/acsphotonics.2c01632

A Facile Approach for 4D Microprinting of Multi‐Photoresponsive Actuators
Hsu, L.-Y.; Mainik, P.; Münchinger, A.; Lindenthal, S.; Spratte, T.; Welle, A.; Zaumseil, J.; Selhuber-Unkel, C.; Wegener, M.; Blasco, E.
2023. Advanced Materials Technologies, 8 (1), Art.Nr.: 2200801. doi:10.1002/admt.202200801

Two-photon microprinting of 3D emissive structures using tetraazaperylene-derived fluorophores
Eichelmann, R.; Monti, J.; Hsu, L.-Y.; Kröger, F.; Ballmann, J.; Blasco, E.; Gade, L. H.
2023. Molecular Systems Design & Engineering, 8 (12), 1470–1476. doi:10.1039/d3me00102d

Laser printed microelectronics
Yang, L.; Hu, H.; Scholz, A.; Feist, F.; Cadilha Marques, G.; Kraus, S.; Bojanowski, N. M.; Blasco, E.; Barner-Kowollik, C.; Aghassi-Hagmann, J.; Wegener, M.
2023. Nature Communications, 14 (1), Art.-Nr.: 1103. doi:10.1038/s41467-023-36722-7

Synergistic, Orthogonal, and Antagonistic Photochemistry for Light‐Induced 3D Printing
Hobich, J.; Blasco, E.; Wegener, M.; Mutlu, H.; Barner-Kowollik, C.
2023. Macromolecular Chemistry and Physics, 224 (1), Art.-Nr.: 2200318. doi:10.1002/macp.202200318

Aqueous seeded RAFT polymerization for the preparation of self-assemblies containing nucleobase analogues
Abad, M.; Nardi, M.; Oriol, L.; Piñol, M.; Blasco, E.
2022. Polymer Chemistry, 14 (1), 71–80. doi:10.1039/d2py01250b

4D Printing of Shape Memory Polymers: From Macro to Micro
Spiegel, C. A.; Hackner, M.; Bothe, V. P.; Spatz, J. P.; Blasco, E.
2022. Advanced Functional Materials, 32 (51), Art.Nr. 2110580. doi:10.1002/adfm.202110580

3D optomechanical metamaterials
Münchinger, A.; Hsu, L.-Y.; Fürniß, F.; Blasco, E.; Wegener, M.
2022. Materials Today, 59, 9–17. doi:10.1016/j.mattod.2022.08.020

Two-Photon Laser Microprinting of Highly Ordered Nanoporous Materials Based on Hexagonal Columnar Liquid Crystals
Monti, J.; Concellón, A.; Dong, R.; Simmler, M.; Münchinger, A.; Huck, C.; Tegeder, P.; Nirschl, H.; Wegener, M.; Osuji, C. O.; Blasco, E.
2022. ACS Applied Materials & Interfaces, 14 (29), 33746–33755. doi:10.1021/acsami.2c10106

Covalent Adaptable Microstructures via Combining Two‐Photon Laser Printing and Alkoxyamine Chemistry: Toward Living 3D Microstructures
Jia, Y.; Spiegel, C. A.; Welle, A.; Heißler, S.; Sedghamiz, E.; Liu, M.; Wenzel, W.; Hackner, M.; Spatz, J. P.; Tsotsalas, M.; Blasco, E.
2022. Advanced Functional Materials, 33 (39), Art.-Nr.: 2207826. doi:10.1002/adfm.202207826

Search for Alternative Two‐Step‐Absorption Photoinitiators for 3D Laser Nanoprinting
Bojanowski, N. M.; Vranic, A.; Hahn, V.; Rietz, P.; Messer, T.; Brückel, J.; Barner-Kowollik, C.; Blasco, E.; Bräse, S.; Wegener, M.
2022. Advanced Functional Materials, 33 (39), Art.-Nr.: 2212482. doi:10.1002/adfm.202212482

Light-sheet 3D microprinting via two-colour two-step absorption
Hahn, V.; Rietz, P.; Hermann, F.; Müller, P.; Barner-Kowollik, C.; Schlöder, T.; Wenzel, W.; Blasco, E.; Wegener, M.
2022. Nature Photonics, 16, 784–791. doi:10.1038/s41566-022-01081-0

Material‐Independent 3D Patterning Via Two‐Photon Lithography and Discontinuous Wetting
Dong, Z.; Monti, J.; Cui, H.; Welle, A.; Singaraju, S. A.; Blasco, E.; Levkin, P. A.
2022. Advanced Materials Technologies, 8 (5), Artk. Nr.: 2201268. doi:10.1002/admt.202201268

A simplified approach to thermally activated delayed fluorescence (TADF) bipolar host polymers
Kunz, S. V.; Cole, C. M.; Gauci, S. C.; Zaar, F.; Shaw, P. E.; Ranasinghe, C. S. K.; Baumann, T.; Sonar, P.; Yambem, S. D.; Blasco, E.; Barner-Kowollik, C.; Blinco, J. P.
2022. Polymer Chemistry, 13 (29), 4241–4248. doi:10.1039/d2py00511e

3D Printed Microstructures Erasable by Darkness
Gauci, S. C.; Gernhardt, M.; Frisch, H.; Houck, H. A.; Blinco, J. P.; Blasco, E.; Tuten, B. T.; Barner-Kowollik, C.
2022. Advanced Functional Materials, 33 (39), Art.-Nr.: 2206303. doi:10.1002/adfm.202206303

Wavelength-Resolved PhotoATRP
Nardi, M.; Blasco, E.; Barner-Kowollik, C.
2022. Journal of the American Chemical Society, 144 (3), 1094–1098. doi:10.1021/jacs.1c11259

In Situ Diagnostics and Role of Light‐Induced Forces in Metal Laser Nanoprinting
Yang, L.; Rahimzadegan, A.; Hahn, V.; Blasco, E.; Rockstuhl, C.; Wegener, M.
2022. Laser & photonics reviews, 16 (3), Art.-Nr.: 2100411. doi:10.1002/lpor.202100411

Two-step absorption instead of two-photon absorption in 3D nanoprinting
Hahn, V.; Messer, T.; Bojanowski, N. M.; Curticean, E. R.; Wacker, I.; Schröder, R. R.; Blasco, E.; Wegener, M.
2021. Nature photonics, 15 (12), 932–938. doi:10.1038/s41566-021-00906-8

Vegetable Oils as Sustainable Inks for Additive Manufacturing: A Comparative Study
Vazquez-Martel, C.; Becker, L.; Liebig, W. V.; Elsner, P.; Blasco, E.
2021. ACS Sustainable Chemistry and Engineering, 9 (49), 16840–16848. doi:10.1021/acssuschemeng.1c06784

Emissive semi-interpenetrating polymer networks for ink-jet printed multilayer OLEDs
Kunz, S. V.; Cole, C. M.; Baumann, T.; Sonar, P.; Yambem, S. D.; Blasco, E.; Barner-Kowollik, C.; Blinco, J. P.
2021. Polymer chemistry, 12 (39), 5567–5573. doi:10.1039/d1py00794g

Multi-material multi-photon 3D laser micro- and nanoprinting
Yang, L.; Mayer, F.; H. F. Bunz, U.; Blasco, E.; Wegener, M.
2021. Light: Advanced Manufacturing, 2, 1–17. doi:10.37188/lam.2021.017

Multi‐Photon 4D Printing of Complex Liquid Crystalline Microstructures by In Situ Alignment Using Electric Fields
Münchinger, A.; Hahn, V.; Beutel, D.; Woska, S.; Monti, J.; Rockstuhl, C.; Blasco, E.; Wegener, M.
2021. Advanced materials technologies, 7 (1), Art.-Nr.: 2100944. doi:10.1002/admt.202100944

Chain-Length-Dependent Photolysis of ortho-Nitrobenzyl-Centered Polymers
Bachmann, J.; Petit, C.; Michalek, L.; Catel, Y.; Blasco, E.; Blinco, J. P.; Unterreiner, A.-N.; Barner-Kowollik, C.
2021. ACS Macro Letters, 10 (4), 447–452. doi:10.1021/acsmacrolett.1c00057

Stabilizing self-assembled nano-objects using light-driven tetrazole chemistry
Nardi, M.; Scherer, T.; Yang, L.; Kübel, C.; Barner-Kowollik, C.; Blasco, E.
2021. Polymer Chemistry, 12 (11), 1627–1634. doi:10.1039/d1py00032b

UV-induced photolysis of polyurethanes
Petit, C.; Bachmann, J.; Michalek, L.; Catel, Y.; Blasco, E.; Blinco, J. P.; Unterreiner, A.-N.; Barner-Kowollik, C.
2021. Chemical Communications, 57 (23), 2911–2914. doi:10.1039/d1cc00124h

Enzyme-Degradable 3D Multi-Material Microstructures
Gräfe, D.; Gernhardt, M.; Ren, J.; Blasco, E.; Wegener, M.; Woodruff, M. A.; Barner-Kowollik, C.
2021. Advanced functional materials, 31 (3), Art.-Nr.: 2006998. doi:10.1002/adfm.202006998

3D printing enabled by light and enabling the manipulation of light: feature issue introduction
Blasco, E.; Maruo, S.; Xu, X.; Wegener, M.
2020. Optical materials express, 10 (12), 3414–3416. doi:10.1364/OME.415864

Tunable photonic devices by 3D laser printing of liquid crystal elastomers
Woska, S.; Münchinger, A.; Beutel, D.; Blasco, E.; Hessenauer, J.; Karayel, O.; Rietz, P.; Pfleging, S.; Oberle, R.; Rockstuhl, C.; Wegener, M.; Kalt, H.
2020. Optical materials express, 10 (11), 2928–2943. doi:10.1364/OME.402855

Hierarchical ordering in light-triggered additive manufacturing
Monti, J.; Blasco, E.
2020. Polymer chemistry, 11 (46), 7316–7329. doi:10.1039/d0py01077d

Multi-material 3D microstructures with photochemically adaptive mechanical properties
Gernhardt, M.; Frisch, H.; Welle, A.; Jones, R.; Wegener, M.; Blasco, E.; Barner-Kowollik, C.
2020. Journal of materials chemistry / C, 8 (32), 10993–11000. doi:10.1039/d0tc02751k

Shining Light on Poly(ethylene glycol): From Polymer Modification to 3D Laser Printing of Water Erasable Microstructures
Houck, H. A.; Müller, P.; Wegener, M.; Barner-Kowollik, C.; Du Prez, F. E.; Blasco, E.
2020. Advanced materials, 32 (34), Art.Nr. 2003060. doi:10.1002/adma.202003060

It’s in the Fine Print: Erasable Three-Dimensional Laser-Printed Micro- and Nanostructures
Gräfe, D.; Walden, S. L.; Blinco, J.; Wegener, M.; Blasco, E.; Barner-Kowollik, C.
2020. Angewandte Chemie / International edition, 59 (16), 6330–6340. doi:10.1002/anie.201910634

A printable thermally activated delayed fluorescence polymer light emitting diode
Cole, C. M.; Kunz, S. V.; Shaw, P. E.; Thoebes, N.-P.; Baumann, T.; Blasco, E.; Blinco, J. P.; Sonar, P.; Barner-Kowollik, C.; Yambem, S. D.
2020. Journal of materials chemistry / C, 8 (37), 13001–13009. doi:10.1039/d0tc02735a

Mechanical stimulation of single cells by reversible host-guest interactions in 3D microscaffolds
Hippler, M.; Weißenbruch, K.; Richler, K.; Lemma, E. D.; Nakahata, M.; Richter, B.; Barner-Kowollik, C.; Takashima, Y.; Harada, A.; Blasco, E.; Wegener, M.; Tanaka, M.; Bastmeyer, M.
2020. Science advances, 6 (39), Art. Nr.: eabc2648. doi:10.1126/sciadv.abc2648

Sensitive Photoresists for Rapid Multiphoton 3D Laser Micro- and Nanoprinting
Kiefer, P.; Hahn, V.; Nardi, M.; Yang, L.; Blasco, E.; Barner-Kowollik, C.; Wegener, M.
2020. Advanced optical materials, 8 (19), Art.-Nr.: 2000895. doi:10.1002/adom.202000895

Rapid Assembly of Small Materials Building Blocks (Voxels) into Large Functional 3D Metamaterials
Hahn, V.; Kiefer, P.; Frenzel, T.; Qu, J.; Blasco, E.; Barner-Kowollik, C.; Wegener, M.
2020. Advanced functional materials, 30 (26), Art.-Nr.: 1907795. doi:10.1002/adfm.201907795

4D Printing at the Microscale
Spiegel, C. A.; Hippler, M.; Münchinger, A.; Bastmeyer, M.; Barner-Kowollik, C.; Wegener, M.; Blasco, E.
2020. Advanced functional materials, 30 (26), Art.Nr. 1907615. doi:10.1002/adfm.201907615

Photo-Cross-Linkable Polymer Inks for Solution-Based OLED Fabrication
Kunz, S. V.; Cole, C. M.; Welle, A.; Shaw, P. E.; Sonar, P.; Thoebes, N.-P.; Baumann, T.; Yambem, S. D.; Blasco, E.; Blinco, J. P.; Barner-Kowollik, C.
2019. Macromolecules, 52 (23), 9105–9113. doi:10.1021/acs.macromol.9b02030

Controlling the shape of 3D microstructures by temperature and light
Hippler, M.; Blasco, E.; Qu, J.; Tanaka, M.; Barner-Kowollik, C.; Wegener, M.; Bastmeyer, M.
2019. Nature Communications, 10 (1), Article no 232. doi:10.1038/s41467-018-08175-w

On the Schwarzschild Effect in 3D Two-Photon Laser Lithography
Yang, L.; Münchinger, A.; Kadic, M.; Hahn, V.; Mayer, F.; Blasco, E.; Barner-Kowollik, C.; Wegener, M.
2019. Advanced optical materials, 7 (22), Art.-Nr.: 1901040. doi:10.1002/adom.201901040

3D Scaffolds to Study Basic Cell Biology
Hippler, M.; Lemma, E. D.; Bertels, S.; Blasco, E.; Barner-Kowollik, C.; Wegener, M.; Bastmeyer, M.
2019. Advanced materials, 31 (26), Article: 1808110. doi:10.1002/adma.201808110

STED-Inspired Laser Lithography Based on Photoswitchable Spirothiopyran Moieties
Müller, P.; Müller, R.; Hammer, L.; Barner-Kowollik, C.; Wegener, M.; Blasco, E.
2019. Chemistry of materials, 31 (6), 1966–1972. doi:10.1021/acs.chemmater.8b04696

Access to Disparate Soft Matter Materials by Curing with Two Colors of Light
Bialas, S.; Michalek, L.; Marschner, D. E.; Krappitz, T.; Wegener, M.; Blinco, J.; Blasco, E.; Frisch, H.; Barner-Kowollik, C.
2019. Advanced materials, 31 (8), Article: 1807288. doi:10.1002/adma.201807288

Multimaterial 3D laser microprinting using an integrated microfluidic system
Mayer, F.; Richter, S.; Westhauser, J.; Blasco, E.; Barner-Kowollik, C.; Wegener, M.
2019. Science advances, 5 (2), Article: eaau9160. doi:10.1126/sciadv.aau9160

Light-Stabilized Dynamic Materials
Houck, H. A.; Blasco, E.; Du Prez, F. E.; Barner-Kowollik, C.
2019. Journal of the American Chemical Society, 141 (31), 12329–12337. doi:10.1021/jacs.9b05092

Epoxy Resins for Negative Tone Photoresists
Vlnieska, V.; Mikhaylov, A.; Zakharova, M.; Blasco, E.; Kunka, D.
2019. Polymers, 11 (9), Art.Nr.: 1457. doi:10.3390/polym11091457

Two in One: Light as a Tool for 3D Printing and Erasing at the Microscale
Batchelor, R.; Messer, T.; Hippler, M.; Wegener, M.; Barner-Kowollik, C.; Blasco, E.
2019. Advanced materials, 31 (40), Article: 1904085. doi:10.1002/adma.201904085

Self-reporting visible light-induced polymer chain collapse
Offenloch, J. T.; Blasco, E.; Bastian, S.; Barner-Kowollik, C.; Mutlu, H.
2019. Polymer chemistry, 10 (33), 4513–4518. doi:10.1039/c9py00834a

Tailoring the Mechanical Properties of 3D Microstructures Using Visible Light Post-Manufacturing
Gernhardt, M.; Blasco, E.; Hippler, M.; Blinco, J.; Bastmeyer, M.; Wegener, M.; Frisch, H.; Barner-Kowollik, C.
2019. Advanced materials, 31 (30), Art.Nr. 1901269. doi:10.1002/adma.201901269

Adding chemically selective subtraction to multi-material 3D additive manufacturing
Gräfe, D.; Wickberg, A.; Zieger, M. M.; Wegener, M.; Blasco, E.; Barner-Kowollik, C.
2018. Nature Communications, 9 (1), 2788/1–6. doi:10.1038/s41467-018-05234-0

A Subtractive Photoresist Platform for Micro- and Macroscopic 3D Printed Structures
Zieger, M. M.; Müller, P.; Blasco, E.; Petit, C.; Hahn, V.; Michalek, L.; Mutlu, H.; Wegener, M.; Barner-Kowollik, C.
2018. Advanced functional materials, 28 (29), Article No.1801405. doi:10.1002/adfm.201801405

Folding polymer chains with visible light
Heiler, C.; Bastian, S.; Lederhose, P.; Blinco, J. P.; Blasco, E.; Barner-Kowollik, C.
2018. Chemical communications, 54 (28), 3476–3479. doi:10.1039/C8CC01054D

Spatially resolved coding of λ-orthogonal hydrogels by laser lithography
Batchelor, R. R.; Blasco, E.; Wuest, K. N. R.; Lu, H.; Wegener, M.; Barner-Kowollik, C.; Stenzel, M. H.
2018. Chemical communications, 54 (19), 2436–2439. doi:10.1039/c7cc09619d

3D Laser Micro- and Nanoprinting: Challenges for Chemistry
Barner-Kowollik, C.; Bastmeyer, M.; Blasco, E.; Delaittre, G.; Müller, P.; Richter, B.; Wegener, M.
2017. Angewandte Chemie / International edition, 56 (50), 15828–15845. doi:10.1002/anie.201704695

Characterizing single chain nanoparticles (SCNPs): a critical survey
Blasco, E.; Tuten, B. T.; Frisch, H.; Lederer, A.; Barner-Kowollik, C.
2017. Polymer chemistry, 8 (38), 5845–5851. doi:10.1039/C7PY01278K

3D Laser Micro- and Nano-Printing: Challenges for Chemistry
Barner-Kowollik, C.; Bastmeyer, M.; Blasco, E.; Delaittre, G.; Müller, P.; Richter, B.; Wegener, M.
2017. Angewandte Chemie, 129 (50), 16038–16056. doi:10.1002/ange.201704695

Photo-reversible bonding and cleavage of block copolymers
Telitel, S.; Blasco, E.; Bangert, L. D.; Schacher, F. H.; Goldmann, A. S.; Barner-Kowollik, C.
2017. Polymer chemistry, 8 (27), 4038–4042. doi:10.1039/C7PY00843K

50th Anniversary Perspective : Polymer Functionalization
Blasco, E.; Sims, M. B.; Goldmann, A. S.; Sumerlin, B. S.; Barner-Kowollik, C.
2017. Macromolecules, 50 (14), 5215–5252. doi:10.1021/acs.macromol.7b00465

Understanding Reactivity Patterns in Light-Induced Nitrile Imine Mediated Tetrazole-Ene Cycloadditions
Blasco, E.; Sugawara, Y.; Lederhose, P.; Blinco, J. P.; Kelterer, A.-M.; Barner-Kowollik, C.
2017. ChemPhotoChem, 1 (5), 159–163. doi:10.1002/cptc.201600042

Photochemically Induced Folding of Single Chain Polymer Nanoparticles in Water
Heiler, C.; Offenloch, J. T.; Blasco, E.; Barner-Kowollik, C.
2017. ACS Macro Letters, 6 (1), 56–61. doi:10.1021/acsmacrolett.6b00858

Photochemically Driven Polymeric Network Formation : Synthesis and Applications
Blasco, E.; Wegener, M.; Barner-Kowollik, C.
2017. Advanced materials, 29 (15), Art. Nr. 1604005. doi:10.1002/adma.201604005

Light-Responsive Self-Assembled Materials by Supramolecular Post-Functionalization via Hydrogen Bonding of Amphiphilic Block Copolymers
Concellón, A.; Blasco, E.; Martínez-Felipe, A.; Martínez, J. C.; Šics, I.; Ezquerra, T. A.; Nogales, A.; Piñol, M.; Oriol, L.
2016. Macromolecules, 49 (20), 7825–7836. doi:10.1021/acs.macromol.6b01112

Self-assembly of thermo and light responsive amphiphilic linear dendritic block copolymers
Garcia-Juan, H.; Nogales, A.; Blasco, E.; Carlos Martinez, J.; Sics, I.; Ezquerra, T. A.; Pinol, M.; Oriol, L.
2016. European polymer journal, 81, 621–633. doi:10.1016/j.eurpolymj.2015.12.021

Polymer-Fullerene Network Formation via Light-Induced Crosslinking
Sugawara, Y.; Hiltebrandt, K.; Blasco, E.; Barner-Kowollik, C.
2016. Macromolecular rapid communications, 37 (17), 1466–1471. doi:10.1002/marc.201600266

Fabrication of Conductive 3D Gold-Containing Microstructures via Direct Laser Writing
Blasco, E.; Müller, J.; Müller, P.; Trouillet, V.; Schön, M.; Scherer, T.; Barner-Kowollik, C.; Wegener, M.
2016. Advanced materials, 28 (18), 3592–3595. doi:10.1002/adma.201506126

Designing π-conjugated polymeric nano- and microstructures via light induced chemistry
Blasco, E.; Yameen, B.; Quick, A. S.; Krolla-Sidenstein, P.; Welle, A.; Wegener, M.; Barner-Kowollik, C.
2015. Macromolecules, 48, 8718–8728. doi:10.1021/acs.macromol.5b02024

Light-driven nitrile imine-mediated tetrazole-ene cycloaddition as a versatile platform for fullerene conjugation
Sugawara, Y.; Jasinski, N.; Kaupp, M.; Welle, A.; Zydziak, N.; Blasco, E.; Barner-Kowollik, C.
2015. Chemical communications, 51, 13000–13003. doi:10.1039/C5CC05507E

Highly Selective Dispersion of Single-Walled Carbon Nanotubes via Polymer Wrapping: A Combinatorial Study via Modular Conjugation
Gerstel, P.; Klumpp, S.; Hennrich, F.; Poschlad, A.; Meded, V.; Blasco, E.; Wenzel, W.; Kappes, M. M.; Barner-Kowollik, C.
2014. ACS macro letters, 3 (1), 10–15. doi:10.1021/mz400472q

A novel photoresponsive azobenzene-containing miktoarm star polymer: self-assembly and photoresponse properties
Blasco, E.; Schmidt, B. V. K. J.; Barner-Kowollik, C.; Pinol, M.; Oriol, L.
2014. Macromolecules, 47, 3693–3700. doi:10.1021/ma500254p

Dual thermo- and photo-responsive micelles based on miktoarm star polymers
Blasco, E.; Schmidt, B. V. K. J.; Barner-Kowollik, C.; Pinol, M.; Oriol, L.
2013. Polymer chemistry, 4 (16), 4506–4514. doi:10.1039/c3py00576c

Photochemical Generation of Light Responsive Surfaces
Blasco, E.; Pinol, M.; Oriol, L.; Schmidt, B. V. K. J.; Welle, A.; Trouillet, V.; Bruns, M.; Barner-Kowollik, C.
2013. Advanced functional materials, 23 (32), 4011–4019. doi:10.1002/adfm.201203602